Selection from Call for Articles: Technically Skilled Practitioner Doubles Over Laughing
(Clearwisdom.net) For the past few years I have traveled the path of Fa-rectification with an open mind. I have not felt lonely. While I understand that some practitioners have seen quite extraordinary things, I for a long time have not sensed anything particularly unusual. Nevertheless, I would like to share a couple of things with everyone today.
Technically Skilled Practitioner Doubles Over Laughing
I bought a computer and printer in 2007 in order to make truth clarification materials. Although I had been able to view the Minghui/Clearwisdom website since 2003, it was always on other practitioners' computers. It was done in secret, and I just looked but didn't ask any questions. So, when I bought a computer and printer, I had no idea how to use them. I was so confused when I opened up my laptop for the first time, as I didn't know how to use it or even what key to press to start it. After several attempts I was able to turn it on.
I was even more surprised when I opened up the printer box. I had no idea how to hook up the wires. I first tried to get on the Internet. I tried repeatedly to use the software designed by practitioners in order to circumvent the Chinese Internet blockade. I studied and refined my efforts and was finally able to reach the Minghui/Clearwisdom website. It took me about a week of fumbling around before I was able to download materials and print them.
With Master's assistance, I was able to find a practitioner with technical skills about a month later. The first sentence he asked me was, "How did you know that I knew how to use computers?" At that time we produced truth clarification materials under very secret circumstances and there were very few practitioners who had technical skills. Even now, only a few practitioners in our area have computer expertise. After opening up my computer and printer, he asked me, "Who taught you?" I said, "Master." He was sitting on the floor and laughed so hard that he doubled over and tears came to his eyes. He told me that the software to circumvent the Internet blockade had been installed incorrectly. He asked if I had really been able to visit the Minghui/Clearwisdom website.
I showed him the article, "How to Establish a Materials Site," that I had printed out. He asked me again how I had printed it out. I told him that I had put paper in the printer. I advanced the paper to the position that I showed him. I didn't remember what button I had pressed but somehow it just came out. He doubled over with laughter. He said, "It had to be Master helping you, otherwise it would be impossible!"
I was able to help practitioners install systems and establish materials sites after studying on the Internet for about six months. I was also able to restore computer operating systems that weren't working properly. I have been able to successfully access the Minghui website ever since that first day.
The Story of a Printer
The practitioner with the technical knowledge mentioned above said, "The model of your printer is out of date. No one manufactures it any more. We are using [a different kind of] printer now." I felt discouraged and sighed. I had just bought it but it was outdated. It seemed I had to buy a new one.
One day after studying the Fa I looked at the printer and said, "I would like to give you to someone else and you can work at other places." Afterwards, I was surprised to see that the paper seemed moist when it came out of the printer. It turned limp in my hands and fell over, yet the print wasn't blurry. It continued like this for over a month. I printed 20-30 copies of the Minghui Weekly and they were all like this. A practitioner asked me, "Your printing paper is damp, how did it get that way? The copies of the weekly are all like this." I said, "No, my printing paper is in good condition, it is only like this after it comes out of the printer." I didn't awaken to the fact that I had a xinxing problem.
One day the print head clogged. After finding the practitioner with the technical knowledge, he explained to me how to unclog it. He said that if it didn't work I would have to change the print head. After he left, I thought, "It is too much of a pain to handle it his way.” I just used a needle to inject pure water into the tube to rinse it out and then let it dry out on a paper napkin for 24 hours.
The next day after studying the Fa, I glanced at the printer and enlightened to the fact that I had a xinxing problem. I realized that I had formed the attachment of making invidious comparisons with other people while living in the ordinary world. In other dimensions, everything is alive. I also realized that I had predestined relationships with those things. The printer was worried because I didn't want it. However I didn't realize my problem. This was bad and the printer immediately malfunctioned. I said to it, "It's not your fault. It is my fault. In the future, I promise that I will treat you well. Please continue to follow me on the path of Fa-rectification and do what you are supposed to do." Whenever I printed materials after that, everything came out normally.
From then on, for the past few years, I have not had any problems. The printer simply, purely, and cheerfully follows me on the divine path.
Selected from “Call for Articles about Divine Occurrences in the Human World”